Lowrance electronic LCX-17M User Manual download pdf (Page 174)

166

Update Trail Criteria (Auto, Time, Distance)

The options are automatic, time or distance. When it's in the default

automatic mode, the unit doesn't update the plot trail while you're

traveling in a straight line. Once you deviate from a straight line, the

unit "drops" a plot point (trail waypoint) onto the trail. This conserves

plot trail points. If a plot trail uses all of the available points allotted to

it, the beginning points are taken away and placed at the end of the trail.

From the Trails Menu, press → to

TRAIL OPTIONS|ENT|↓ to UPDATE CRITERIA.

Press

↑ or ↓ to select criteria type|ENT. If you selected Time, the Update

Rate data entry box appears on the menu. If you selected Distance, the

Update Distance data entry box appears on the menu.

Trail Update Rate (Time, Distance)

You can update a trail by time, with a range from 1 second to 9999

seconds; the default is 3 seconds. You can update by distance, with a

range from 0.01 mile/nm/km to 9.99 mile/nm/km; the default is 0.10

miles.

With one of the Update Criteria selected, use the cursor arrows to

highlight either the

UPDATE RATE (TIME) or UPDATE DISTANCE data entry

boxes and press

ENT. Press ↑ or ↓ to change the first character, then

press

→ to the next character and repeat until the entry is correct.

Press

EXIT to return to the Trail Options Menu.

Update Time Rate (left) and Update Distance(right).

Specific Trail Options

Delete Trail

To delete a specific trail, from the Trails Menu, press ↓ to

Saved

Trails

|ENT. Select a trail and press ENT. The Edit Trail menu appears as

seen in the following figure. Press

→ to DELETE TRAIL|ENT|← to YES|ENT.

1 2 ... 169 170 171 172 173 174 175 176 177 178 179 ... 203 204

No comments

Lowrance electronic LCX-17M User Manual Page 174